Any device that requires the use of water needs to filter the water. Our water source is far from clean and is also a source of pollutants such as pesticides, hard minerals, chemicals and pathogens. Your spa has a water filter to remove these things.
However, you must replace the filter every so often. Particles accumulate and impedes the flow of clean water. If you still do not know how to easily change the filter criteria, here are some steps you walkby:
Step 1: Follow the water supply. Below the tray, you can cut the valves are. There are several sub valves. The pump is squeezed between the first two valves. The filter is driven with two valves. You should be familiar with the anatomy of the tank, so you know which part to replace.
Step 2: Close the valves located on both sides of the filter. Also, make sure you turn on the fan and the pump. You can find these parts inDocumentation for the user. View the photos there for the party.
Step 3: After you disable, you can now remove the filter. Disconnect the filter assembly to the tank. Some models of the tank, it must be the bottom of the device and then turn them loose to remove the filter. Some tanks only requires removing the top of the filter.
Step 4: After removing the filter, check if it's still pretty good and there are no holes. If you stillin good condition, just give it some 'cleaning. Enjoy relaxing in a solution of vinegar to a rubble in minutes. You can also use it for cleansing foam, and gently wipe the filter clean. Rinse well.
Step 5: Before you return the clean filters or replacement filters, you should try to put Vaseline on the gasket. This helps you to quickly adapt the filter. Now you can return the filter.
Step 6: Make sure you are firmly secured before openingvalves. Try to see a cycle if there are losses. When finished, the process and make the connection. Should be resolved.
Once done, you should work as a filter as new.
